Resultsbee.com

They are made with two tapered panels of closed cell foam, wrapped in one or two layers of 6-mil polyethylene. Two or more panels are joined together, both with support channels embedded into the edge of the foam panel to provide rigidity across the center of the tub. The two panels are slid into a custom sewn ?bag?, which is zipped up tight around

The foam a cover's cores are made of is called Expanded Polystyrene and is made of small beads that are expanded with steam. Once expanded they are dried and then attached together simply by compressing them. The more pressure they are compressed under, the high the density of the foam. The individual beads are waterproof! however, water can satura

More than you think. Because it?s spread out over the top of the cover, the weight is evenly distributed. Anything under 24? shouldn?t be a concern. Even more, if the snow is dry and light. Heavy layers of ice mixed with snow is more of a concern. If you want to remove snow from a spa cover, use a plastic shovel without metal edges.

First off, it's going to probably weigh a lot less than you old waterlogged one. Depending on which model you choose and what size your spa is, your new cover will weigh anywhere from 35 to 75 pounds.

An in-ground hot tub may increase your home value, although generally not as much as you invested in the tub. If removing the tub will cause extra construction to close or cover the hole in the deck, patio, wall or such, then it is considered built-in and may increase the home appraisal.