Resultsbee.com

While it is possible to have a remote control multiple fans, it is not recommended. The frequencies can get blocked off and ideally un-sync the fans. For example - both fans are on high speed and you?re not close enough to both so one will stay on high speed and the other will change to the new speed pressed. Thus it is recommended to have one cont

It's made up of a metal grid suspended from hanging wires and other hardware that support lay-in ceiling panels. The panels conveniently drop into the grid to complete the new ceiling. You may also see the term ?drop ceiling tiles? used. With drop ceilings, both panels and tiles are laid into the grid.

The remote controls are designed to use radio frequency to control the fan and lights. The cause of your remote turning on and off on its own may be because it is picking up another radio frequency. They are designed to pick up any range up to 40ft. If you have multiple fans in your home using different remotes, you will need to change the individu

Sometimes, the artwork is actually mounted to the board with tape or adhesive. Other times tension alone holds the artwork and mounting board together. The boards are held in the frame spring clips or points. When tightened, the clips or points hold the board tight, sandwiching the art between it and the acrylic, which prevents the artwork from sh

The primary difference between 4-blade and 5-blade is appearance. For fans that use identical motors and blade designs, a 4-blade fan will move a bit more air than a 5-blade fan. The reduced weight allows the motor to spin a bit faster increasing the amount of air moved.

All blades are weighed and grouped by weight. Check for wobble after each step. Check that all blades are screwed firmly into blade holders and that all blade holders are tightened securely to motor. Make sure that canopy and mounting bracket are tightened securely to ceiling joist. Make sure the down rod ball is properly seated into the mounting b